沙特创新 美国GE DR51 15%玻纤增强
| 规格级别： | 注塑级 | 外观颜色： | --- |
| 用途概述： | 应用于聚光灯、器具外壳、把手、连接器。 | ||
| 备注说明： | 15% 玻纤增强聚酯。优异的机械、热、电气性能。非阻燃。 | ||
| 性能项目 | 试验条件[状态] | 测试方法 | 测试数据 | 数据单位 | ||||||||||
| 物理性能 | 比重 | --- | --- | 1.41 | --- | |||||||||
| 吸水率 | --- | --- | 0.07 | % | ||||||||||
| 模具收缩率 | --- | --- | 4-6 | E-3 | ||||||||||
| 增强 | --- | --- | 15 | % | ||||||||||
| 机械性能 | 拉伸强度（断裂点） | --- | --- | 93 | MPa | |||||||||
| 拉伸率（断裂点） | --- | --- | 5 | % | ||||||||||
| 弯曲模量 | --- | --- | 4823 | MPa | ||||||||||
| 冲击强度缺口 | 23℃ | --- | 53 | J/m | ||||||||||
| 硬扩度洛氏R | --- | --- | 118 | --- | ||||||||||
| 电气性能 | 损耗因数 | --- | --- | 0.02 | --- | |||||||||
| 介电常数 | --- | --- | 3.4 | --- | ||||||||||
| 体积电阻 | --- | --- | 3.00E+16 | Ohm-cm | ||||||||||
| 热 性 能 | 阻燃性 | --- | --- | 0.7 | mm | |||||||||
|
--- | --- |
|
|
||||||||||
| 阻燃性 | --- | --- | HB | --- | ||||||||||
| 热变形温度 | --- | --- | 210 | ℃ | ||||||||||
| 热变形温度 | --- | --- | 190 | ℃ | ||||||||||
| 线膨胀系数 | --- | --- | 2.2E-05 | 1/℃ | ||||||||||
